Epson RIP Station 5100, Руководство администратора, Страница: 31 / 140

2
2-3 Levels of access and control
Hold queue
Jobs sent to the Hold queue are spooled to the server’s hard disk. These jobs cannot
proceed through the printing process without intervention via the job management
tools (see the User Guide).
Print queue
If you publish the Print queue, jobs sent to it are processed and printed in the order
they are received. Jobs prioritized by an administrator from the job management tools,
and jobs sent via the Direct connection can take priority over jobs sent to the Print
queue.
Direct connection
The Direct connection transmits jobs directly to the RIP Station, but only when the
RIP Station is idle. If the RIP Station is busy, the job remains at the user workstation
until the RIP Station is ready. The job is then processed as soon as the previous job is
finished and before the next queued job is processed.
Jobs sent to the Direct connection are not stored on the RIP Station hard disk and do
not appear in the display of current jobs seen from the job management tools;
therefore the Direct connection provides a measure of security for sensitive files. Jobs
sent to the Direct connection do appear in the Job Log, for accounting purposes.
N
OTE
:
To download fonts to the RIP Station, you must publish the Direct connection.
Fiery WebTools
The RIP Station can support Internet or intranet access with Fiery WebTools from
Windows 95/98, Windows NT 4.0, Windows 2000, and Mac OS computers. For
information about the supported versions of Internet browsers, see the Setup Guide.
To enable use of Fiery WebTools, you must do the following in Setup:
• Enable TCP/IP.
• Set an IP address, subnet mask, and gateway address for the RIP Station.
• Enable Web Services.