Epson RIP Station 5100 Скачать руководство пользователя страница 27

Страница: 27 / 140

1-13

Connecting network cable to the RIP Station

Back view of the RIP Station

Shut down the RIP Station

before attaching it to any network device

Do not attach

cables to more than one Ethernet connector; only one Ethernet connection can be
made at any one time.

USE

THINNET

CABLE

With

the RIP Station turned off, connect the transceiver to the AUI connector on the

back of the RIP Station. Slide the latch to lock the transceiver connection.

Connect the thinnet cable to the BNC connector on the transceiver.

OTE

If the external transceiver has an SQE switch, make sure the switch is set to OFF.

It should be set to OFF at all times. The functions controlled by the SQE switch are
not required for use with the RIP Station.

Configure network servers for printing, and proceed to Setup.

Power switch

Power connector

Not used

Parallel interface connector

Printer interface connector

Not used

AUI connector for thinnet or thicknet

RJ-45 connector for twisted-pair (10/100Base T)

Содержание RIP Station 5100













































































































































Результаты поиска

Содержание RIP Station 5100

Отзывы:

Epson RIP Station 5100, Руководство администратора, Страница: 27 / 140

Результаты поиска

Содержание RIP Station 5100

Отзывы: