
Using the PriorityFax Advanced Features
Changing Automatic
Redial Settings
lf you are using automatic sending and the fax number you dial
is busy, the fax machine automatically enters the automatic
redial mode. This feature leaves you free to continue with other
work without neglecting to send out that important fax
document.
The factory setting for Automatic Redial causes the PriorityFax to
redial the number you tried every five minutes until it reaches the
other fax machine or until it redials six times. If you want to
change the number of tries or the number of minutes between
tries, follow these steps:
Make sure no document is in the machine.
Press FUNCTION.
Press 1
to enter the register mode.
R E G I S T E R ( 1 - 9 ) ?
Press 7 to enter the automatic redial mode.
AUTO REDIAL
# OF TRIES: 06
Enter the number of times you would like the automatic redial
feature to call the fax number in the event of a busy signal. Use a
zero before a singledigit entry, such as 03 for three tries. The
maximum is 15, and 00 turns off the feature.
Press
NEXT.
The following display appears:
4-7
Содержание PriorityFAX 3000
Страница 1: ......
Страница 10: ...PriorityFax 3000 Manual Index viii ...