
Using the PriorityFax
Using speed dial faxing
After you have registered the speed dial numbers, you can send
Erasing Numbers
If you wish to erase
a
fax number, a telephone number, or a name,
and Names
use the instructions in this section.
Erasing Numbers
a fax to any of those numbers in just three steps:
Insert the document face down in the feeder. The ready display
appears.
Press S. DIAL
Press the two numbers on the keypad corresponding to the
number you
want to
use
and press
START.
If you have not registered a number for the button you pressed,
the message NOT REGISTERED appears.
When
you
press START, the fax machine starts
feeding the first
page and starts dialing.
If the receiver’s fax machine answers, the PriorityFax starts
transmission automatically. If the receiver’s fax machine is busy,
the Priorityfax automatically enters the automatic redial mode.
You can also use the speed dial buttons for dialing after pressing
SPKR
or lifting the handset. (This is manual sending.) In this
case, you need
to
press START after
hearing the fax tone from the
receiver’s fax machine, and it will not enter the automatic redial
mode.
To erase a number follow these steps:
If not already shown, bring up the number
on
the display.
Make sure the cursor is under the first number of the item you
wish to erase.
Press PAUSE
three times to erase the number.
You may now enter
a
new number.
If you would rather return to the date/time display without
entering a new number, press
SET three times.
2-25
Содержание PriorityFAX 3000
Страница 1: ......
Страница 10: ...PriorityFax 3000 Manual Index viii ...