Epson PriorityFAX 3000 Скачать руководство пользователя страница 17

Страница: 17 / 122

PriorityFax 3000 Manual

Plug the other end into your modular telephone wall jack (USOC

RJ11C). Make sure both ends of the cord click securely into place.

Installing a multi-line

telephone connection

If you have the older 4-prong telephone wall jack, you

must use

modular 4-prong adapter (USOC RJA1X). Plug

the adapter into the wall jack and then plug the telephone

cord into the adapter, as shown in the illustration below.

Most offices have key systems or PBXs. Although in many

cases it is relatively easy to connect the fax machine to a key

system or

PBX,

suggest

that you

contact the company

that installed your organization’s telephone system and ask

them to connect the fax machine for you.

It is preferable to have

a separate line

to the fax machine.

This way, you can leave the unit in Automatic Answer mode

24 hours

a day and

derive full benefit from the fax machine’s

unattended operations capabilities.

If the fax machine is connected to a multi-line system, ask

your installer to connect the fax machine to the last line on

the system. This prevents the fax machine from being

activated each time

telephone call comes into your office.

1-4

Содержание PriorityFAX 3000



























































































































Результаты поиска

Содержание PriorityFAX 3000

Отзывы:

Epson PriorityFAX 3000, Руководство пользователя, Страница: 17 / 122

Результаты поиска

Содержание PriorityFAX 3000

Отзывы: