Epson PP-100N - Discproducer - DVD Duplicator x2 Скачать руководство пользователя страница 164

Страница: 164 / 174

164

Checking with EPSON Total Disc Monitor

EPSON Total Disc Monitor is a utility that enables checking of the status of this product (PP-100N) and the remedy
procedures for errors.

See “Starting EPSON Total Disc Monitor” on page 50 in this guide for EPSON Total Disc Monitor start procedure.

EPSON Total Disc Monitor can also be automatically started by clicking [Publish] in EPSON Total Disc Maker.

Device Status

This displays the status of this product (PP-100N) and error descriptions and messages.

When

is displayed, check the product (PP-100N) by referring to the

displayed remedy procedure.

Ink Status

This displays the remaining ink level.

The ink level is low when

is displayed. Obtain a replacement ink cartridge.

The ink should be replaced when

is displayed. Replace with a new ink cartridge.

See “How to perform a nozzle check” on page 135 in this guide for the ink cartridge

changing procedure.

The number of printable labels is an estimated value of how many more the same

labels as the labels printed before can be printed. This value may differ slightly from

the actual value due to factors such as the printing data and printing environment.

Values of 1000 or more are displayed as “1000 or more, ” and quantities fewer than

1000 discs are displayed in 10-disc units.

CD/DVD Drive

Status

This displays the CD/DVD drive status.

When

is displayed on the drive icon, check the product drive by referring to the

displayed message.

Ink Status

Printer Status

Stacker Status

Device Status

CD/DVD Drive Status

Содержание PP-100N - Discproducer - DVD Duplicator x2















































































































































































Результаты поиска

Содержание PP-100N - Discproducer - DVD Duplicator x2

Отзывы:

Похожие инструкции для PP-100N - Discproducer - DVD Duplicator x2

Бренды по названию

Популярные бренды

Epson PP-100N - Discproducer - DVD Duplicator x2, Руководство пользователя

Результаты поиска

Содержание PP-100N - Discproducer - DVD Duplicator x2

Отзывы:

Похожие инструкции для PP-100N - Discproducer - DVD Duplicator x2

Бренды по названию

Популярные бренды