Epson Powerspan, Руководство пользователя

Страница: 91 / 219

Follow these steps to enter a power-on password:
1. When you turn on your computer, press the reset button, or
press
Ctrl Alt Del,
you see the following prompt:
E n t e r p a s s w o r d :
2. Type your password and press
Enter.
The screen does not
display what you type.
After you enter the correct password, you see Password
OK
and the computer loads your operating system.
If you do not enter the correct password, you see Password
i s i n c o r r e c t a n d a n o t h e r p r o m p t t o e n t e r t h e p a s s w o r d .
You have two more chances to enter the correct password; try
again.
If you do not enter the correct password at the third prompt,
you see the following message:
S y s t e m h a l t e d ! M u s t p o w e r d o w n .
The computer locks the keyboard. Press the reset button or turn
the computer off and on; then try to enter the correct password
again.
Changing or Deleting Passwords
You can change or delete the power-on password whenever
you see the Enter password: prompt, as described in this
section.
However, you cannot change or delete the power-on password
if a network password is activated. See page 4-11 for
instructions on deactivating the network password and then
return to this section to change or delete the power-on
p a s s w o r d .
Using Your Computer 4-13