Epson PowerLite TW-100, Руководство пользователя

Страница: 42 / 91

Fine-tuning the Projector
37
Recalling a Memory Setting
When you want to use a saved memory setting, press one of the
memory buttons on the remote control. This applies the saved settings
to the image currently being projected on the screen.
If the same video source is connected to the projector the next time
you turn it on, the projector uses the same saved memory setting in
effect the last time it was on.
Once you have saved a memory setting, you cannot erase it. However,
you can change it; just follow the same procedure as for setting it the
first time.
Viewing Lamp Usage and Other
Information
Use the About menu to view information about the display settings of
your input source and the number of hours the lamp has been used.
1. Press the
Menu
button to display the menu screen.
2. Press the button on the control panel, or press down on the
Select
button on the remote control, to highlight the About
menu.
If the projector is connected to a video source, you see these
settings:
Lamp
Reset Lamp Timer
Video Source
Video Signal
Execute
0H Video
Setting
Advanced
About
Reset All
Select Enter