Epson PowerLite Pro G6050W, Руководство пользователя

Страница: 41 / 270

See the documentation that came with the HDBaseT transmitter for instructions on connecting it to
your video device or computer.
Note: To enable communication from the Ethernet and serial ports on the transmitter, select On for the
Control Communications setting in the projector's Extended menu. Turning this setting on disables the
projector's LAN , RS-232C , and Remote ports.
Parent topic: Projector Connections
Related references
Projector Setup Settings - Extended Menu
Connecting to an External Computer Monitor
If you connected the projector to a computer using a Computer or BNC port, you can also connect an
external monitor to the projector. This lets you see your presentation on the external monitor even when
the projected image is not visible.
If you want to output images to an external monitor when the projector is turned off, you need to select
Communication On for the Standby Mode setting and Always On for the A/V Output setting in the
projector's Extended menu.
Note: Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly.
1. Make sure your computer is connected to the projector's Computer or BNC port. If there are two
computer ports, make sure you use the Computer1 port.
2. Connect the external monitor's cable to your projector's Monitor Out port.
Note: If you do not see an image on the external monitor, you may need to change the Monitor Out
setting in the projector's Extended menu.
Parent topic: Projector Connections
41