Doing More with Your Projector
47
■
Password:
See page 43 for instructions on setting a password for locking DVDs.
■
Disc Lock:
See page 43 for instructions on setting a password for locking DVDs.
5. To exit the Setup menu, press
.
Adjusting Dolby Audio Settings
You can adjust settings for external equipment with a DTS/Dolby
Digital Decoder or DVDs recorded in Dolby Digital.
1. Press the
button on the remote control. You see the
Language
Setup Page
.
2. Press to display the
Audio Setup Page
.
3. Press
to highlight
Digital Output
or
Night Mode
, then press to select it. You
can select the following settings:
■
Digital Output
: Change to
Stream
if you have connected a DTS/Dolby Digital
Decoder to the Audio-Out port.
■
Night Mode
: Turn this setting on if you are watching a Dolby Digital DVD at low
volume.
4. Press
or
to select the setting you want to change, then press
to save it.
5. To exit the menu, press
.
Setting Video and Other Options
You can use the Visual Setup menus to adjust the signal format for external video equipment
and set other options.
Option Menu
1. Press
on the remote control. You see the Visual Setup menu.
2. Press
to highlight
Option
, then press
to select it.
3. Press
until you see the option you want to set.
