Epson PowerLite 82c, Руководство пользователя

Страница: 87 / 113

Solving Problems
87
■
Depending on your computer’s video card, you might need to use
the Display utility in the Control Panel to make sure that both the
LCD screen and external monitor port are enabled. See your
computer’s documentation or online help for details.
If you’re using a PowerBook or iBook with
Macintosh OS X:
1. From the Apple menu, select
System Preferences
, then click
Display
or
Displays
.
2. Select
VGA Display
or
Color LCD
, click
Arrange
or
Arrangement
, then put a check mark in
Mirror Displays
.
If you’re using a PowerBook or iBook with
Macintosh OS 9:
1. From the Apple menu, select
Control Panels
, then click
Monitors
or
Monitors and Sound.
2. Click the
Arrange
icon.
3. Drag one monitor icon on top of the other. This lets you display
on the projector screen as well as the LCD screen.
4. If the
Arrange
icon isn’t available, click the
Monitor
icon.
5. Select one of the listed
Simulscan
resolutions. (Allow a few
seconds for the projector to sync up after making the selection.)
The message
Not Supported
is displayed.
■ Make sure your computer’s resolution doesn’t exceed XGA (for
the PowerLite 82c) or SVGA (for the PowerLite 62c) and the
frequency is supported by the projector. See page 100. If
necessary, change your computer’s resolution setting as described
below.
■ Make sure the correct
Video Signal
is selected in the Signal
menu. See page 60. It should normally be set to
Auto
.