Epson PowerLite 825, Руководство пользователя

Страница: 78 / 199

78
Using the Projector on a Network
Using Access Point Mode
To use Access Point (infrastructure) mode, first adjust your projector
and wireless access point or AirPort base station settings as described
in this section.
Configuring the Projector
1. Press the
Menu
button, then choose
Network
and press
Enter
.
2. Choose
Network Configuration
and press
Enter
.
3. Choose
Wireless LAN
and press
Enter
. You see this screen:
4. Make sure
On
is selected for the Wireless LAN Power setting.
5. Make sure
Advanced
is selected for the Connection mode. If
not, use the buttons on the remote control to highlight
Advanced
, then press
Enter
to select it.
6. If your network is using 802.11a, use the buttons on the
remote control to highlight
802.11a
, then press
Enter
to select it.
7. To enable your computer to find the projector on the network,
you need to enter the SSID name of your access point or the name
of your AirPort network in the
SSID
text box. (The name of your
AirPort network may be different from that of your AirPort base
station; select your base station in the AirPort Admin utility and
click
Configure
to check the name of your network.)