Epson PowerLite 5600p, Руководство пользователя

Страница: 84 / 114

78
Connecting to Additional Equipment
Installing the Projector
The projector can be installed for three different viewing setups: front
projection, ceiling mounting, or rear projection onto a
semi-transparent screen, as shown:
To project from overhead, you’ll need to select
Ceiling
in the
projector’s Advanced menu. To project from the rear, select
Rear
Proj
. See “Setting Advanced Features” on page 54.
If you’re ceiling-mounting the projector and you place it above screen
level, you’ll have to tilt it down to position the image on-screen. This
causes the image to lose its square shape. You can then correct the
distortion by using the
Keystone
function in the projector’s menu
system (see “Customizing Projector Features” on page 53) or by using
the
Keystone
button on the projector’s control panel.
If you place the projector’s lens so it’s level with the top of the screen,
the image will be square and you won’t have to adjust it. If you place
the lens lower than the top of the screen, you’ll have to tilt the
projector upward if you want to fill the whole screen with the image.
Controlling the Projector from a Computer
If you want to be able to control the projector’s settings from a
computer, you can install the EMP Link V program on the Projector
Software CD-ROM. You’ll also need a serial cable to connect the
projector to the computer.
front projection ceiling mounting rear projection
note
See “Positioning the
Projector” on page 10 for
more information.
5600 and 7600.book Page 78 Thursday, December 14, 2000 2:46 PM