Epson PowerLite 5600p, Руководство пользователя

Страница: 57 / 114

Fine-tuning the Projector
51
Creating Your Own Startup Screen
You can transfer any image from your computer or video source to the
projector, and then use it as your startup screen. You can also use it as
the screen displayed when the projector is not receiving a signal or
when you press the
A/V Mute
button. The image can be a company
logo, slogan, photograph, or any other image you want to use.
Capturing the Image
Start by displaying the image you want to use. It can be an image from
either a computer or video source such as a DVD player or digital
camera. Then follow these steps to capture the image and transfer it to
the projector:
1. Press the
Menu
button on the control panel or remote control.
You see the menu screen.
2. Press the down arrow (control panel) or press down on the
Enter
button (remote control) to highlight the
User’s Logo
menu,
then press
Enter
.
3. When you see the screen shown at right, select
Yes
and press
Enter
. A selection box displays over the image.
4. Use the arrow buttons on the control panel or the
Enter
button
on the remote control to select the area of the image you want to
use. Then press
Enter
.
5. When you see the message “Do you use this image?” select
Yes
and press
Enter
.
Video
Audio
Effect
Setting
User's Logo
Advanced
About
Reset All
:Execute :Return
Execute
User's Logo Capture
Do you use the present image
as a user's logo?
Yes No
:Select :Return :Execute
5600 and 7600.book Page 51 Thursday, December 14, 2000 2:46 PM