The projector's power light turns orange. This indicates that the projector is receiving power, but is
not yet turned on (standby mode).
Note:
With
Direct Power On
turned on, the projector turns on as soon as you plug it in.
4.
Press the power button on the projector or the remote control to turn on the projector.
The projector beeps and the power light flashes green as the projector warms up. After about five
seconds, the power light stops flashing and turns green.
Warning:
Never look into the projector lens when the lamp is on. This can damage your eyes and is
especially dangerous for children.
If you do not see a projected image right away, try the following:
• Turn on the connected computer or video device.
• Insert a DVD or other video media, and press the play button (if necessary).
• Press the
Source Search
button on the projector or remote control to detect the video source.
• Press the button for the video source on the remote control.
Parent topic:
Using Basic Projector Features
Related references
Projector Setup Settings - Extended Menu
Turning Off the Projector
Before turning off the projector, shut down any computer connected to it so you can see the computer
display during shutdown.
Note:
Turn off this product when not in use to prolong the life of the projector. Lamp life will vary
depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
1.
Press the power button on the projector or the remote control.
The projector displays a shutdown confirmation screen.
67
Содержание PowerLite 420
