Epson PowerLite 2042 Скачать руководство пользователя страница 163

Страница: 163 / 218

163

Related references

Projector Light Status

Cleaning the Air Filter and Vents

Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them.

Turn off the projector and unplug the power cord.

Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as
a paintbrush).

Note:

You can remove the air filter so you can clean both sides of it. Do not rinse the air filter in

water, or use any detergent or solvent to clean it.

Caution:

Do not use canned air. The gases may leave a flammable residue or push dust and debris

into the projector's optics or other sensitive areas.

If dust is difficult to remove or the air filter is damaged, replace the air filter.

Parent topic:

Air Filter and Vent Maintenance

Replacing the Air Filter

You need to replace the air filter in the following situations:

• After cleaning the air filter, you see a message telling you to clean or replace it

• The air filter is torn or damaged

You can replace the air filter while the projector is mounted to the ceiling or placed on a table.

Turn off the projector and unplug the power cord.

Содержание PowerLite 2042



























































































































































































































Результаты поиска

Содержание PowerLite 2042

Отзывы:

Epson PowerLite 2042, Руководство пользователя, Страница: 163 / 218

Результаты поиска

Содержание PowerLite 2042

Отзывы: