Related references
Input Signal Settings - Signal Menu
Connecting to a Composite Video Source
If your video source has a composite video port, you can connect it to the projector using an optional
RCA-style video or A/V cable.
1.
Make sure the projector and your video source are turned off.
2.
Connect the cable with the yellow connector to your video source's yellow video output port.
3.
Connect the other end to the projector's
Video
port.
1
Video
port
Parent topic:
Connecting to a Video Source for Sound
You can play sound through the projector's speaker system if your video source has audio output ports.
Connect the projector to the video source using a stereo mini-jack adapter cable (with one 3.5 mm
mini-plug and two RCA plugs).
Note:
You can also use an RCA cable connected to the audio adapter cable that came with your
projector.
1.
Connect the audio cable to your video source's audio-out ports.
38
Содержание PowerLite 1750
