4.
Select the printer name you want to connect to.
If the connection is successful, the remaining ink/toner levels are displayed.
Changing the Connection Method Between the
Printer and the Smart Device
Follow the steps below to change to the connection method you want to use.
When changing to Wi-Fi, make sure that the smart device is connected to the same Wi-Fi network as the printer.
See the manual provided with your smart device for instructions on making network settings.
When changing the connection method from Wi-Fi Direct mode to Simple AP mode, connect the printer and
smart device in Wi-Fi Direct mode and run Web Config. Change the
Connection Mode
to
OFF
or
Simple AP
from
Advanced Settings
>
Services
>
Wi-Fi Direct
.
Related Information
&
“Procedure Outline for Connecting through an Access Point” on page 43
&
“Procedure Outline for Wi-Fi Direct Connection (Simple AP Mode)” on page 56
&
“Connecting the Smart Device to the Printer Directly by Wi-Fi Direct (for Android Only)” on page 59
&
“Connecting the Smart Device and Printer by Wi-Fi Direct Mode (for Android Only)” on page 60
&
“Checking the Connection Using Epson iPrint” on page 62
Additional Connections for a Smart Device
1.
Access the following website, and then enter the product's model number.
2.
Go to
Setup
, and then run
Download
or
Connect
as necessary.
User's Guide
Connecting the Printer to the Smart Device or Computer
64
Содержание PictureMate PM-401
Страница 1: ...User s Guide NPD5337 00 EN ...