Epson picturemate PM 310, Руководство пользователя

Страница: 26 / 40

24
Troubleshooting PictureMate PM 300 / PM 310
Troubleshooting
The solutions herein are for problems when printing
without using a computer.
If you cannot solve the problem, you can get more
information from the LCD screen. Press the
button,
select Troubleshooting , and then press OK .
Printer Power Problems
LCD screen is off.
❏
Press the
P
On button on the side of the printer
to make sure that the printer is on.
❏
If the Auto Power Settings have been made, the
printer automatically turns off at the preset time.
Press
P
On
to turn on the printer.
❏
Turn off the printer and make sure that the power
cord is securely plugged in.
❏
Make sure that your outlet works and is not
controlled by a wall switch or timer.
LCD screen came on and then went out.
The printer’s voltage may not match the outlet rating.
Turn off the printer and unplug it immediately. Then,
check the printer labels.
c
Caution:
If the voltage does not match, DO NOT PLUG
YOUR PRINTER BACK IN. Contact your
dealer.
Print and Noise Problems
The printer makes an unexpected noise after you
install a photo cartridge.
The first time you install the photo cartridge, the printer
will charge its print head for about three and a half
minutes. Wait until charging finishes before you turn it
off, or it may charge improperly and use more ink the
next time you turn it on.