Safety Instructions
5
When using LCD screen
❏
The LCD screen contains a few small bright or
dark spots. These are normal and do not mean
that the LCD screen is damaged in any way.
❏
Only use a dry, soft cloth to clean the LCD screen.
Do not use liquid or chemical cleansers.
❏
If the LCD screen on your printer's control panel
is damaged, contact your dealer. If the liquid
crystal solution gets on your skin, wash them
thoroughly with soap and water. If the liquid crystal
solution gets into your eyes, flush them
immediately with water. If discomfort or vision
problems remain after a thorough flushing, see a
doctor immediately.
When using the optional Bluetooth Photo
Print Adapter
Refer to the Bluetooth Photo Print Adapter's
documentation for the safety instructions.
When handling photo cartridges
Observe the following when handling photo cartridges:
❏
Do not shake photo cartridge after removing it
from the bag; this can cause leakage.
❏
Do not remove or tear the label on the cartridge;
this can cause leakage.
❏
Do not use a photo cartridge beyond the date
printed on the cartridge carton: otherwise, it may
result in reduced print quality. For best results, use
up the photo cartridge within six months of
installing it.
❏
Do not dismantle photo cartridges or try to refill
them. This could damage the print head.
❏
After bringing a photo cartridge inside from a cold
storage site, allow it to warm up at room
temperature for at least three hours before using
it.
❏
Store photo cartridges in a cool, dark place.
