Epson PhotoPC L-400, Руководство пользователя

Страница: 109 / 116

107
MESSAGE PROBLEM & SOLUTION
No images Problem:There are no images recorded on the memory card.
Solution:Insert a memory card with images. Also check the image
after each shot to confirm.
This image cannot be
displayed.
Problem:The image file exists but can't be displayed.
Solution:Playback System (See page 32.)
This file cannot be deleted
because this file is locked
or cannot be deleted.
Problem:This image has been locked to prevent deletion.
Solution:Delete the image with the machine that took the image or
locked it.
Some files are locked or
could not be deleted.
Problem:Some images on this card have been write-protected.
Solution:Delete the image with the device that took the image or
locked it.
The necessary Frame
file does not exist or is
unusable.
Problem:The picture can't be viewed because there is no file or the
link has been broken.
Solution:The link has been broken or the frames itself has been
deleted. Replace or add a frame linked to this file. (See
pages 49.)
PLAYBACK MODE MESSAGES
LIST OF ERROR MESSAGES
LIST OF ERROR MESSAGES
Follow the appropriate instructions below when the error message appears.
MESSAGE PROBLEM & SOLUTION
This memory card is write-
protected.
Problem:Memory card is locked.
Solution:Unlock the memory card by hand. (See page 93.)
Memory card error. Check
the memory card.
Problem:Unspecified memory card problem.
Solution:Remove the card and replace it. (See page 16.) Contact
the card maker.
No memory card inserted. Problem:The camera has no memory card inserted.
Solution:Insert a memory card. (See page 16).
The memory card is full. Problem:No more room for data on the memory card.
Solution:Make room by deleting data (See pages 36-37.) or export
the data to your computer and then reformat the card. (See
page 93.)
No Frames. Problem:No frames stored in the camera.
Solution:Load up to 5 frames into the camera.(See pages 48-49.)
This Frame file cannot be
used with this camera.
Problem:The camera doesn't support the frame.
Solution:Reload with different frame that can be used with this
camera. (See pages 49.)
PHOTO MODE MESSAGES