Installing the Optional Equipment
Page 37
Loading Documents Manually
You can load documents manually even when the auto document feeder
(ADF) is installed.
Lift the ADF and place the document on the document table. Then lower
the ADF and scan the document.
Always close the ADF and its cover before scanning. If you are scanning
thick material or documents more than 1.6 inches (2 cm) thick, leave the
ADF in the upright position. Be sure to cover any exposed areas of the
document table glass.
Be sure to select Flatbed in the Document Source settings in EPSON
TWAIN.
Selecting Settings
When you are using the auto document feeder, you must use the EPSON
TWAIN driver. For information on selecting driver settings, see the
EPSON TWAIN User’s Guide.
Opening the auto
document feeder or its
cover while it is
operating results in an
option error and paper
feeding stops.
When scanning thin
documents, you may
see an impression of
the underside of the
auto document feeder
in your scans. If so,
remove the auto
document feeder and
re-install the
document cover as
described in
Reattaching the
Document Cover.
ref.book Page 37 Monday, September 28, 1998 4:24 PM
