Transferring Data
19
P-3000
User’s Guide
Insert the memory card into the memory card slot with the label side facing the display side
of the viewer, then push it fully into the slot.
Note:
Insert memory cards in the correct direction. Otherwise, the memory card or the viewer may be
damaged.
Removing a CF memory card from the slot
1. Make sure that the
Access
lamp is off.
c
Caution:
Never remove a memory card while the
Access
lamp flashes. Doing so may cause data
in the card to be lost or damaged.
2. Push the eject button twice.
The memory card is pushed out.
3. Pull out the memory card.
Note:
❏
When using a memory card set in the CF adapter, do not remove only the memory card.
Disconnect the CF adapter from the viewer.
❏
Be sure to use the viewer with the eject button pushed in to avoid possible damage.
