Using the Projector Security Features
53
6. Use the
u
,
d
,
l
, or
r
buttons to select a zoom factor (display size) and press the enter
button.
7. When the message
Save this image as the User’s Logo?
appears, select
Yes
and press
the enter button. Saving the logo may take a few moments. Do not use your projector,
remote control, or video source while the logo is being saved.
8. When you see the message
Completed
, press
Menu
to exit.
Choosing When to Display the Image
After your image is saved, you can set it to display as the startup screen, the screen you see
when there’s no signal, or the screen you see when you press the
A/V mute button.
1. Press the
Menu
button on the remote control, highlight the
Extended
menu, and press
the enter button.
2. Select
Display
and press the enter button.
3. Choose from these display options:
■
Set
Display Background
to
Logo
to display your image when there is no signal.
■
Set
Startup Screen
to
On
to display your image when the projector is warming up.
■
Set
A/V Mute
to
Logo
to display your image when you press the
A/V mute
button.
4. When you’re finished, press
Menu
to exit.
Locking the Projector
The projector includes two lock settings to prevent the image from being accidentally
changed once it’s adjusted, and to keep children from turning on the projector without adult
supervision.
To access the lock settings, follow these steps:
1. Press the
Menu
button on the remote control.
2. Use the menu navigation buttons to open the
Settings
menu.
3. Choose from these options:
■
Child Lock
to disable the
P
power button on the projector’s control panel unless it is
pressed for about 3 seconds. (You can use the
P
power button to turn it off,
however.) Since you can still use the remote control to turn on the projector, you
may want to keep it away from children’s reach.
