Epson LX-86, Руководство пользователя

Страница: 86 / 146

Figure 9-4. Arrow design
After plotting all the dots as in Figure 9-4, you calculate the num-
bers for each pin pattern by dividing the design grid into separate
print lines. For the arrow design the grid was divided into three lines,
each seven dots high. Then each column was examined and the sums
of the pin values determined. This process for the first line is shown in
Figure 9-5. The pin values are on the left side and the sums are at the
bottom of each column.
Those of you who have read the previous chapter will see that
designing graphics is much like designing user-defined characters.
8 1 0 8 8 8 8 8 8 4 2 1 0 0 0 0 0 0 0 0 0 2 3 4 1 0 0
4 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 8 2 0 0 0
Figure 9-5. First line of arrow figure
82