2-4
Using the Printer
R4C4610
Rev. C
A5 size
USING.FM
6/28/00
Pass 3
L
Proof Sign-off:
SEI
Y.Ohkawara K.Kono
K.Kono
SEI
M.Kauppi
Selecting fonts
After entering the micro adjust mode by holding down the
Pause
button for three seconds, you can change font settings with the
Tear Off
button. The two font lights come on (
n
) and go off (
o
)
to show the current selection. Press the button repeatedly to cycle
through all of the available selections; then stop when you reach
the desired font.
Your selection stays in effect until you change it again or turn off
the printer. However, any font choices you make with your
software will cancel your control panel selection. The table below
shows how the
Tear Off
lights appear for each selection.
n
= on
o
= off
f
= flashing
Font
FONT
Light
1 2
Sample
EPSON Draft
o n
EPSON Draft condensed
o f
EPSON Roman
n o
EPSON Roman condensed
n n
EPSON Sans Serif
n f
EPSON Sans Serif condensed
f o
