Connection
This chapter explains the environment or procedure to connect the printer to the network.
Connecting to the Network
Connecting to LAN
Connect the printer to the network by Ethernet.
Related Information
&
“Connecting to the Network Using the Installer” on page 18
Assigning an IP Address Using EpsonNet Config
Assign an IP address to the printer using EpsonNet Config.
A
Turn on the printer.
B
Connect the printer to the network using an Ethernet cable.
C
Start EpsonNet Config.
A list of the printers on the network is displayed. It may take a while before they are displayed.
D
Double-click the
printer that you want to assign to.
If you connect the printer to a network with an available DHCP function, the IP address is assigned using the
DHCP function, and then
is displayed.
Note:
❏
If you have connected multiple printers of the same model, you can identify the printer using the MAC address.
❏
After the printer is connected to the network, you can change the IP address assignment method.
Network Guide
Connection
14
Содержание LQ-2090II
Страница 1: ...Network Guide NPD5771 01 EN ...
Страница 15: ...E Select Network TCP IP Basic Network Guide Connection 15 ...
Страница 17: ...I Click OK J Click Refresh Network Guide Connection 17 ...