Epson LQ-2090, Справочное руководство

Страница: 69 / 248

Paper Handling 61
2
2
2
2
2
2
2
2
2
2
2
2
Note:
To switch from printing with the front sheet guide to printing with the
front push tractor, you need to remove the front sheet guide.
1. If a single sheet remains in the printer, press the Load/Eject
button to eject it.
c
Caution:
Never use the knob to eject paper; this may damage the printer
or cause it to lose the top-of-form position.
2. Make sure that the tractor is installed in the front or rear push
position and that continuous paper is loaded on it as
described in “Loading continuous paper with the tractor” on
page 14.
3. Set the paper release lever to the front or rear push position,
depending on the tractor position you are using.
Your printer loads the continuous paper automatically when you
begin printing.
Using the Micro Adjust Function
The Micro Adjust function allows you to move the paper forward
or backward in 0.141 mm (1/180-inch) increments so that you can
make precise adjustments to the top-of-form and tear-off
positions.
Adjusting the tear-off position
If your paper’s perforation is not aligned with the tear-off edge,
you can use the Micro Adjust function to move the perforation to
the tear-off position.