Epson LightScene EV-100 Скачать руководство пользователя страница 161

Страница: 161 / 189

161

Solutions to Projector Power or Shut-Off Problems

If the projector does not come on when you press the power button or it shuts off unexpectedly, try the
following solutions:

• Make sure the power cord is securely connected to the projector and to a working electrical outlet.

• The projector's buttons may be locked for security. Unlock the buttons or use the remote control to

turn on the projector.

• If the projector's light source shuts off unexpectedly, it may have entered standby mode after a period

of inactivity. Press the power button to wake the projector and adjust the

Sleep Mode Timer

setting to

change the sleep interval.

• If the projector is installed on a lighting track, disconnect it from the lighting track and plug it into a

power outlet to make sure it is working.

• If the projector's light source shuts off, the Status light is flashing blue, and the Temp light is orange,

the projector has overheated and shut off. Check the solutions for this light status.

• If the power button on the remote control does not turn on the projector, check its batteries and make

sure the

Remote Receiver

setting is turned on in the projector's menu, if available.

• If the remote receiver setting is off, press and hold the

Menu

button on the remote for at least 15

seconds to restore the default setting.

• The power cord may be defective. Try another power cord. If that doesn't work, disconnect the cord

and contact Epson.

Parent topic:

Solving Projector or Remote Control Operation Problems

Related references

Projector Feature Settings - Settings Menu
Projector Light Status

Solutions to Problems with the Remote Control

If the projector does not respond to remote control commands, try the following solutions:

• Check that the remote control batteries are installed correctly and have power. If necessary, replace

the batteries.

• Make sure you are operating the remote control within the reception angle and range of the projector.

• Make sure the projector is not warming up or shutting down.

• Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release

the button to wake the remote control up.

Содержание LightScene EV-100






























































































































































































Результаты поиска

Содержание LightScene EV-100

Отзывы:

Epson LightScene EV-100, Руководство пользователя, Страница: 161 / 189

Результаты поиска

Содержание LightScene EV-100

Отзывы: