Epson L210 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 76

background image

Adjustment

Required Adjustments

53

L350/L300/L355/L210/L110 Series

Revision B

Confidential

3.1 Required Adjustments

The table from the following page lists the required adjustments depending upon the parts being repaired or
replaced. Find the part(s) you removed or replaced, and check which adjustment(s) must be carried out.

If the EEPROM data cannot be read out from the old Main Board using the Adjustment
Program when replacing the Main Board is required, the Waste Ink Pad Assy must be
replaced with the Main Board at the same time.

After all required adjustments are completed, use the “Final check pattern print”

function to print all adjustment patterns for final check. If you find a problem with the

printout patterns, carry out the adjustment again.

When replacing the Main Board, the adjustment should be made after performing the

initial setting.

In this chapter, the product names are called as follows:
• L350 Series: L350/L351
• L300 Series: L300/L301
• L355 Series: L355/L358
• L210 Series: L210/L211
• L110 Series: L110/L111

The table items and marks used in the “Required Adjustment List” provided on the
following pages have the following meanings.
• “O” indicates that the adjustment must be carried out.
• “---” indicates that the adjustment is not required.
• The “Mechanism Adjustment” should be performed just after reinstalling or

reassembling the part or unit.

• The “Adjustments using the Adjustment Program” need to be performed after

reassembling the printer completely.

If you have removed or replaced multiple parts, make sure to check the required
adjustments for the all parts. And when multiple adjustments must be carried out, be
sure to carry out them in the order given in the “Priority” row.

«
...
51
52
53
54
55
...
»

Содержание L210













































































Отзывы:

Нет отзывов

Похожие инструкции для L210

Бренд: EBS Страницы: 4

Бренд: NCR Страницы: 38

Бренд: Datamax Страницы: 2

Бренд: Dascom Страницы: 138

Бренд: Dascom Страницы: 166

Бренд: Canon Страницы: 198

Бренд: Datamax Страницы: 95

Mark II E-4205e

Бренд: Datamax Страницы: 72

Бренд: Konica Minolta Страницы: 266

8437477 - EasyShare ESP 9 All-In-One Printer

Бренд: Kodak Страницы: 143

Бренд: Partner Страницы: 15

Digital Color Press 700

Бренд: Xerox Страницы: 216

VarioLink 2650cp

Бренд: Oce Страницы: 2

WORKCENTRE 7428

Бренд: Xerox Страницы: 208

Бренд: EcLine Страницы: 72

Бренд: Digital Equipment Страницы: 122

Бренд: GALLERY Страницы: 10

Бренд: Sharp Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды