3. Insert the printer software CD-ROM in the CD-ROM drive.
Note:
❏
If the language selection dialog box appears, select your language.
❏
If the EPSON Installation Program dialog box does not appear automatically, double-click the
My Computer
icon, right-click the CD-ROM icon, click
OPEN
in the menu that appears, and
then double-click
InstallNavi.exe
.
4. When the license agreement dialog box appears, read the statement, and then click
Next
.
5. Select your printer.
6. Select
USB Replacement Service
, and then click
Install
.
7. When the installation is complete, click
OK
.
Replacing a USB-connected printer
Follow these steps to replace a printer with another printer of the same model.
1. Access the printer driver, click the
Utility
tab, and then write down the current settings for
Auto
Tear Off Setting
,
Notification Settings
, and
Print Position Adjustment
2. Turn off the printer, and then disconnect the USB cable from the printer.
3. Connect the USB cable to the new printer, and then turn on the printer.
4. Access the printer driver, click the
Utility
tab, and then specify the settings that you wrote down in
step 1.
5. Confirm that the top-of-form position is adjusted correctly vertically, and then adjust it with the
Micro Adjust function if necessary. See “Adjusting the top-of-form position” on page 24.
BI Parallel Port Driver
BI Parallel Port Driver is software used when communicating at high speed if the printer is connected
using a parallel port. The transmission rate quickens when communicating at high speed.
GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User’s Guide
Printer Software
38