Epson G650B, Руководство пользователя

Страница: 87 / 143

78
Network Scanning
The illustration below shows a sample network configuration in which network
scanning is available. The software you install depends on which computer you’re
setting up—a scanner server or client computer.
Setting Up the Scanner Server
You can set up any Windows Me, Windows 98, Windows 95, Windows 2000, or
Windows NT 4.0 computer as a scanner server, as long as it is configured and
operational on an existing network with TCP/IP Protocol installed. If you don’t have
the TCP/IP Protocol installed on the scanner server, see Appendix A, “Installing the
TCP/IP Protocol,” for instructions.
Be sure to unlock the scanner and connect it to the scanner server using the SCSI
cable that came with your scanner, or connect it using the optional IEEE 1394
interface, as described in Chapter 1, “Setting Up Your Scanner.” Then install the
scanner driver on the scanner server, as described in Chapter 2, “Installing Scanner
Software.”
Follow the instructions for your operating system to set up the scanner server:
■
“Scanner Server Installation on Windows Me, Windows 98, and Windows 2000”
on page 79.
Scanner Server
EPSON Scan Server
EPSON TWAIN Pro*
TWAIN-compliant software (such as Presto! PageManager)
Network
* If you installed EPSON TWAIN Pro on the scanner server so that you could make a direct
connection to the scanner, remember that you must exit EPSON Scan Server to use EPSON
TWAIN Pro. EPSON Scan Server disables EPSON TWAIN Pro.
EPSON GT-10000+
Client Computers
EPSON TWAIN Pro Network TWAIN-compliant
software (such as Presto! PageManager)