Epson G650B, Руководство пользователя

Страница: 63 / 143

55
Chapter 4
How to Scan
This chapter offers you some tips for getting the best scan, gives an overview of
the scanning process, and describes how to set up and use the
a
Start button for
one-step scanning.
Selecting Your Scanner Source
Your EPSON GT-10000+ scanner comes with two all-purpose drivers, EPSON
TWAIN Pro and TWAIN Pro Network. The scanner driver is what you select as the
source in your application. This is the software that allows your computer to
communicate with your scanner. It also allows you to select certain settings to
optimize the scanned image.
If you installed EPSON TWAIN Pro on the scanner server so that you could
make a direct connection to the scanner, remember that you must exit
EPSON Scan Server to use EPSON TWAIN Pro. EPSON Scan Server
disables EPSON TWAIN Pro.
If you’re accessing a network scanner connected to another computer,
always use TWAIN Pro Network as your source. For network scanning
instructions, see Chapter 6.
See the sections below for basic scanning with EPSON TWAIN Pro and Start button
scanning. For detailed instructions on using EPSON TWAIN Pro or TWAIN Pro
Network, see your electronic
EPSON GT-10000+ Reference Guide . You can also
install the ISIS driver and use it as your source. (See the next chapter, “Scanning With
the ISIS Driver” on page 67.)