Epson G650B, Руководство пользователя

Страница: 31 / 143

Setting Up Your Scanner
23
Static electricity can damage electronic components. Discharge static
electricity by touching the metal frame of your scanner before handling the
interface board.
3. Insert the interface board, with the circuit board face down, along the side guide
rails in the optional interface slot until it is flush with the back panel.
4. Secure the board with the attached retaining screws and reconnect all the cables.
Understanding IEEE 1394 Connections
The interface board is equipped with two cable connector ports. One port is used to
connect the board to the computer, and the other port is used to connect additional
IEEE 1394 devices in a daisy-chain or tree configuration. Use the cable supplied with
your board when connecting the scanner to your computer. The cable can be
connected without switching off the power supply to the computer or the scanner
because it complies with the IEEE 1394 standard.
Do not connect or disconnect IEEE 1394 cables when the scanner
software is running.