Epson G5000 - PowerLite XGA LCD Projector, Руководство пользователя

Страница: 67 / 116

Managing Projectors
67
Using Projector E-mail Alerts
When this feature is enabled, the projector sends you an e-mail alert if
it has any problems.
1. Press the
Menu
button on the remote control, select the
Network
menu, then press
Enter
. You see the following screen:
2. Choose
Mail
, then press
Enter
.
3. Highlight
On
to receive e-mail notifications, then press
Enter
.
4. Enter the IP address for the
SMTP server
for the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used: 127.x.x.x,
224.0.0.0 to 255.255.255.255 (where x is a number from 0 to
255).
5. Enter the SMTP server’s port number. The default value is 25.
You can enter a numeric value from 1 to 65535.
6. Choose one of the
Email Address
fields, then enter the e-mail
address where you want to receive a message when a problem
occurs. You can register up to three addresses. You can enter up to
32 alphanumeric characters for the e-mail address.
note
You can also set e-mail alerts
from EMP Monitor (see the
EMP Monitor Operation
Guide
for more
information).