Epson FX-286 - Impact Printer, Руководство пользователя

Страница: 130 / 223

Letters in parentheses, such as (n) or (d), are variables, which are
explained in the comments sections.
In BASIC you can use either decimal or hexadecimal numbers, and
if there is a single letter in the second ASCII code column, you can use
that letter in quotation marks instead of the number below it. For
example, the format section for the right margin command is as fol-
lows:
ASCII code:
ESC Q
(n)
Decimal :
27
81
( n )
Hexadecimal:
1B
51 (n)
In BASIC you can send the command to set the right margin to 60 in
three ways:
Decimal:
LPRINT CHR$(27) CHR$(81) CHR$(60)
Hex:
LPRINT CHR$(&H1B) CHR$(&H51) CHR$(&H3C)
Decimal with quotes:
LPRINT CHR$(27) "Q" CHR$(60)
ESCape sequences that require a 0 or
1
with a letter, such as ESC
“W1"
to turn on double-width, can use either the ASCII code or the
numeral in quotation marks for the 0 or
1.
For example, in BASIC
you can turn on double-width with either of the formats below:
LPRINT CHR$(27) "W1"
or
LPRINT CHR$(27)"W"CHR$(l)
Software Commands in Numerical Order
The following list shows the control codes and ESC sequences that
the FX-286 uses along with their decimal values. For further details on
their use, consult the index to find out where they are discussed in
detail. The number on the right after each name is the page where the
command is described.
7
BEL
Beeper . . . . . . . . . . . . . . . . . . . . . . . . ..G-30
8
BS
Backspace . . . . . . . . . . . . . . . . . . . . . . . G-30
9
HT Tab Horizontally . . . . . . . . . . . . . . . . . . G-19
1 0 L F
Line Feed . . . . . . . . . . . . . . . . . . . . . . . . G-15
1 1 V T Tab Vertically . . . . . . . . . . . . . . . . . . . . . G-20
12 FF Form Feed . . . . . . . . . . . . . . . . . . . . . . . G-18
13
CR Carriage Return . . . . . . . . . . . . . . . . . . . G-31
G-2