Page length for front tractor
This setting allows you to set the page length (in inches) for
continuous paper loaded on the front push tractor.
Page length for rear tractor
This setting allows you to set the page length (in inches) for
continuous paper loaded on the rear push tractor.
Skip over perforation
This setting takes effect only when you are using continuous
paper. When you select
On
, the printer provides a one-inch
(25.4 mm) margin between the last line printed on one page
and the first line printed on the next page. Because most
application programs override margin settings made from the
control panel, you should use this setting only if you cannot set
your top and bottom margins using your application.
Auto tear off
When you turn on this setting and print on continuous paper
with the front or rear push tractor, the printer automatically
advances the paper perforation to the tear-off position, where
you can easily tear off the printed page(s). When the printer
receives the next print job, it automatically moves the unused
paper back to the top-of-form position and starts printing, so
no paper is wasted between print jobs.
When you select
Off
and print on continuous paper with the
front or rear push tractor, you need to move the perforation to
the tear-off position manually by pressing the
Tear Off/Bin
button. See “Advancing the Paper to the Tear-Off Edge” in
Chapter 2 for more information. (The tear-off feature is not
available for paper loaded on the pull tractor.)
5
R
Sun-G+ Rev.C
A5 size
Chapter 5
97/11/13
pass 0
Changing Printer Settings From the Printer’s Control Panel
5-5
