89
9.
Wipe off any dust or dirt on the glass scanning surfaces using the included microfiber cloth or a soft,
dry cloth. If the glass surface is stained with grease or some other hard-to-remove material, use a
small amount of glass cleaner on a soft cloth to remove it. Wipe off all remaining liquid.
Caution:
Do not spray glass cleaner directly on the scanning surfaces. Be careful not to place too
much force on the glass.
10. Close the scanner cover.
11. Plug in the AC adapter and turn on the scanner.
Parent topic:
Cleaning and Transporting Your Scanner
Checking the Scanner Roller Counter
Check the scanner roller counter to determine when your rollers need to be replaced. When you replace
the scanner rollers, reset the scanner roller counter so you know when you may need to replace the
rollers again.
1.
Make sure the scanner is turned on and connected to your computer.
2.
Do one of the following to open Epson Scan Settings:
•
Windows 10
: Click
and select
All Apps
. Select
EPSON
>
EPSON Scan Settings
.
•
Windows 8.x
: Navigate to the
Apps
screen and select
EPSON Scan Settings
.
•
Windows (other versions)
: Click
or
Start
>
All Programs
or
Programs
>
EPSON
>
EPSON
Scan
>
EPSON Scan Settings
.
Содержание FF-640
