Epson F6070, Руководство пользователя

Страница: 89 / 111

Problem Solver 89
The reverse side of the printed paper is soiled.
Feeding or ejecting problems
Unable to feed or eject paper.
o
Is the print head scuffing the edge of the paper?
Select Top35mm/Bottom15mm for the Roll Paper Margin option in the Setup menu.
See “Setup Menu” on page 56.
o
Widen the bottom margin
Depending on the paper usage, storage conditions, and the content of the print data, the
bottom edge may be scuffed when printing. In this situation it is best to create your data with a
wider bottom margin.
o
Does the interior of the printer need cleaning?
The rollers may need cleaning. Clean the rollers by feeding and ejecting paper.
See “Cleaning the Inside” on page 81.
o
Select On for Paper Size Check in the menus.
Although printing normally stops if the print image is wider than the paper, when Off is selected
for Paper Size Check in the Setup menu, the printer may print outside the bounds of the paper,
getting ink on the inside of the printer in the process. This can be prevented by selecting On for
Paper Size Check in the Setup menu.
See “Setup Menu” on page 56.
o
Is ink dry on the printed surface?
Depending on the printing density and media type, the ink may take a while to dry. Do not stack
the paper until the printed surface is dry.
See “Cleaning the Inside” on page 81.
o
Is the paper loaded in the correct position?
See the following for the correct paper loading positions.
See “Loading Roll Paper” on page 27.
If the paper is loaded correctly, check the condition of the paper that you are using.
o
Is the paper creased or folded?
Do not use old paper or paper with folds in it. Always use new paper.