Epson F6070, Руководство пользователя

Страница: 67 / 111

Maintenance 67
9. The printer will return to its ready-to-print state once the last color has been set.
Replacing and Refilling Consumables
Time Period for Chip Unit Replacements and Ink Refills
If the message Chip unit expended. is displayed on the control panel, this means that the
chip unit needs to be replaced soon. Obtain an ink pack of the appropriate color as soon
as possible.
You will be unable to print if the chip unit for even one color needs to be replaced. If the
Chip unit expended. message is displayed during a print job, you can replace the chip unit
and refill the ink while printing continues.
See “Options and Consumable Products” on page 93.
Important:
This printer has a remaining ink warning system. Use the following procedure to replace the chip
unit and refill the ink correctly.
After the service engineer attaches the ink tanks, replace the chip unit and refill the ink when
remaining ink is about 2.8 inches (70 mm) from the bottom of the ink tank.
This system does not directly detect the amount of ink remaining in the ink tank. Instead, the
amount of ink remaining is estimated based on the ink usage conditions and displayed as a
message. To maintain the accuracy of this system, you must replace the chip unit and refill the
ink as soon as possible once the remaining ink is 2.8 inches (70 mm) or less from the bottom of
the ink tank.