Epson F6070, Руководство пользователя

Страница: 45 / 111

Basic Operations 45
Printable Area
This section describes the printable areas for the printer.
If the margin set in an application is larger than the following setting values, sections
beyond the specified margins are not printed. For example, if 15 mm is selected for the left
and right margins in the printer menus and the document fills the page, the 0.6 in. (15 mm)
at the left and right sides of the page will not be printed.
The gray area in the illustration below shows the printable area.
The arrow in the illustration indicates the direction of the ejected paper.
Margins for roll paper depend on the option selected for Roll Paper Margin in the menus,
as shown in the following table. For Roll Paper Margin Settings, see “Setup Menu” on
page 56.
The default setting is Normal .
Roll Paper Margin Parameter Margin Values
Normal 1, 3 = 15 mm
2, 4 = 3 mm
Top15 mm/Bottom 15 mm 1, 3 = 15 mm
2, 4 = 3 mm
Top 35 mm/Bottom 15 mm 1 = 35 mm
3 = 15 mm
2, 4 = 3 mm
10 in. to 44 in.
5 in. to
49 ft