Epson F6070, Руководство пользователя

Страница: 36 / 111

Basic Operations 36
Viewing and Changing Media Settings
The following is displayed in the control panel after paper is loaded.
Checking Media Settings
The dialog displays the following options for the paper currently loaded in the printer.
Selected Paper Type
The following display indicates what is used as the basis for paper settings.
RIP settings : Printing is performed based on the RIP settings.
XXXXXXXXXXXXXXXXXX : Printing is performed based on paper settings #1 saved in
the printer.
This printer allows you to configure and save various paper settings depending on the
characteristics of the paper used. You can save up to 10 different settings in setting slots 1
through 10.
See “Saving Settings” on page 40.
Remaining Setup
When this option is turned On , the approximate amount of paper remaining is calculated
based on the set paper length and the amount used in printing, and this value is displayed
in the information display area of the
.
tab. This allows you to check the amount of paper
remaining on-screen before printing, which helps you to determine when you need to
replace the paper. You can also set a threshold value which, when the amount of paper
remaining decreases below this level, will display a warning message.