Epson F6070, Руководство пользователя, Страница: 32 / 111

Basic Operations 32
O
Manual cut:
Press the
)
button to cut the paper using the built-in cutter. A cutline is printed for
manual cutting and can be used as a guide when cutting paper using the built-in cutter.
Setting method
Use the
l
/
r
buttons in the control panel to select the
/
tab and press the OK or Menu
button. The Setup menu will be displayed; select Printer Setup > Roll Paper Setup > Auto
Cut > On and press the OK button. For manual cutting, select Off . The default setting is
On . See “Setup Menu” on page 56 for more information.
Manual cut method
If Auto Cut is turned off, you can cut at any position via the following procedure after
printing is complete.
Buttons that are used in the following settings:
Note:
O
It may take a while to cut the roll paper.
O
Some of the roll paper may not be cut using the built-in cutter. Use a commercially available
cutter to cut the paper. Follow the steps below when using a third-party cutter.
Press the
)
button. Keep the
d
button pressed to feed the paper so that the cut location
is below the paper eject guide. Cut the paper using scissors or a third-party cutter.