background image

Start Here

11 

 When the message to see the Start Here sheet appears 
on the LCD screen, press and hold the   help button for 
5 seconds. 

12 

 When the ink confirmation message appears on the LCD 
screen, press the   start button to start charging the ink. 
Ink charging takes approximately 10 minutes. A message 
appears when ink charging is complete. Press the 

OK 

button to continue.

Caution:

 Do not turn off the product, raise the printer cover, or 

load paper while the product is charging or you’ll waste ink.

Note:

 After some ink is used for charging, the rest is available 

for printing.

13 

  Follow the on-screen instructions to adjust the print 
quality. Press the 

OK button to continue.

Note:

 

•   You need to load paper before you can adjust the print quality. 

See “Load paper” below for details.

•   Select 

Adjust Later if you want to adjust the print quality later. 

For more information, see the online User’s Guide.

3

   Load  paper

See the online User’s Guide for information about loading 
capacity, available paper types and sizes, loading envelopes, 
and using the rear feed slot.

 Make sure the product is done charging the ink. Open the 
paper cassette cover and pull out the paper cassette until 
it stops.

Slide the edge guides all the way out.

IMPORTANT: Before using this product, make sure you read 
these instructions and the safety instructions in the online 
User’s Guide.

1

   Unpack

Make sure you keep the box shown above for use when 
transporting the printer.

Caution: 

Do not lift the product by gripping the scanner unit. Make 

sure you lift using the handholds on the bottom of the product.

Note:

 Do not open the ink bottle until you are ready to fill the ink tank. 

The ink bottle is vacuum packed to maintain reliability.

Lift the printer cover until it clicks into place.

 Remove all protective materials from the product.

 Caution:

 Do not touch the flat white cable, translucent film, or 

the ink tubes.

Close the printer cover.

Note:

 Do not connect the power cord yet.

2

  Fill ink tank and charge  

the ink

Warning:

 Keep the ink bottle out of the reach of children and do not 

drink the ink.

Caution:

 This product requires careful handling of ink. If ink spills, 

wipe it off immediately with a damp towel to avoid permanent stains. If 
ink gets on your clothes or belongings, it may not come off.

Note:

•  Epson cannot guarantee the quality or reliability of third-party ink.
•   Use the ink bottle included with the printer to set up the product. 

Part of the ink will be used to charge the print head. This bottle may 
print fewer pages compared with replacement ink bottles.

 Open the ink tank cover, then open the cap.

 Unpack the ink bottle. Hold the ink bottle upright and 
slowly turn the bottle cap to remove it.

Caution:

 Do not shake or squeeze the ink bottle. Do not touch 

the top of the ink bottle after its cap is removed.

 Insert the ink bottle into the filling port, as shown below.

Note:

 Do not force the bottle into position.

 Wait for the ink to fill the tank. Do not squeeze the bottle.

Note:

 If ink does not flow from the bottle, lift and reinsert the 

bottle.

Caution:

 After setup, periodically inspect the ink level to ensure 

it is not below the lowest line on the tank. Prolonged use when 
ink is below the lowest line could damage the product. See the 
online User’s Guide for refilling instructions.

 When the ink bottle is empty, remove the bottle and 
securely close it with the cap. 

Note:

 Do not leave the ink bottle inserted; otherwise the bottle 

may be damaged or ink may leak.

Securely close the ink tank cap.

 Close the ink tank cover.

 Connect the power cord to the back of the product and to 
an electrical outlet.

Caution:

 Do not connect to your computer yet.

 Press  the   power button to turn on the product, then 
wait for the   power light to stop flashing.

 Note:

 If an error code appears, turn off the product and check 

that no protective material has been left inside the product.

10 

 Press   or   to select your language on the LCD screen, 
then press the 

OK button. 

Note:

 You can change this setting later using the product’s 

control panel. For more information, see the online User’s Guide.

ET-M2170

ETM2170_SH_E_CPD56770.indd   1

12/5/18   12:14 PM

Содержание ET-M2170

Страница 1: ... tank and charge the ink Warning Keep the ink bottle out of the reach of children and do not drink the ink Caution This product requires careful handling of ink If ink spills wipe it off immediately with a damp towel to avoid permanent stains If ink gets on your clothes or belongings it may not come off Note Epson cannot guarantee the quality or reliability of third party ink Use the ink bottle in...

Страница 2: ... tank and charge the ink Warning Keep the ink bottle out of the reach of children and do not drink the ink Caution This product requires careful handling of ink If ink spills wipe it off immediately with a damp towel to avoid permanent stains If ink gets on your clothes or belongings it may not come off Note Epson cannot guarantee the quality or reliability of third party ink Use the ink bottle in...

Страница 3: ...the paper settings on the product s control panel 4 Install software Note If you are using a Mac or your computer does not have a CD DVD drive an Internet connection is required to obtain the product software To print from a Chromebook go to www epson com support gcp U S or www epson ca support gcp Canada for instructions 1 Make sure the product is NOT CONNECTED to your computer Windows If you see...

Страница 4: ...e product s control panel 4 Install software Note If you are using a Mac or your computer does not have a CD DVD drive an Internet connection is required to obtain the product software To print from a Chromebook go to www epson com support gcp U S or www epson ca support gcp Canada for instructions 1 Make sure the product is NOT CONNECTED to your computer Windows If you see a Found New Hardware sc...

Отзывы: