❏
Product status screen for Web Config
Launch a web browser from the connected device, and then enter the IP address for Wi-Fi Direct (Simple AP) to
open Web Config. Tap
Product Status
>
Wi-Fi Direct
and check the Wi-Fi Direct status.
Disconnect unnecessary devices
If the maximum number of devices have already been connected to the printer, disconnect the unnecessary devices
and try to connect the new device.
Delete the SSID for Wi-Fi Direct on the Wi-Fi screen for the device that you do not need to connect to the printer.
Checking the SSID Connected to the Printer
You can check the SSID by printing a network connection report, network status sheet, or on Web Config.
User's Guide
Solving Problems
112
Содержание ET-M1170 Series
Страница 1: ...User s Guide NPD6078 00 EN ...