Epson ET-5150 Series, Руководство пользователя

Страница: 224 / 303

5.
Hold down the [WPS] button on the wireless router until the security light flashes.
If you do not know where the [WPS] button is, or there are no buttons on the wireless router, see the
documentation provided with your wireless router for details.
6.
Tap Start Setup on the printer.
7.
Close the screen.
The screen automatically closes after a specific length of time.
Note:
If connection fails, restart the wireless router, move it closer to the printer, and try again. If it still does not work, print a
network connection report and check the solution.
8.
Close the Network Connection Settings screen.
Related Information
&
“Checking the Network Connection Status” on page 229
Making Wi-Fi Settings by PIN Code Setup (WPS)
You can automatically connect to a wireless router by using a PIN code. You can use this method to set up if a
wireless router is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the wireless
router.
1.
Tap on the home screen.
2.
Select Wi-Fi (Recommended) .
If the printer has already been connected by Ethernet, select Router .
3.
Tap Start Setup .
If the network connection is already set up, the connection details are displayed. Tap Change Settings to
change the settings.
If the printer has already been connected by Ethernet, tap
Change to Wi-Fi connection.
, and then select
Yes
after checking the message.
Adding or Replacing the Computer or Devices
>
Re-setting the Network Connection
>
Making Wi-
…
224