Epson EQUITY II+, Руководство пользователя

Страница: 113 / 151

The program continues after an error in one of the following ways:
l
It returns to the DEVICE LIST, or
l
If you are running multiple tests and are not terminating on an error, the
program repeats the test that caused the error.
The remainder of this chapter describes the tests you can run on the
system’s internal devices and on the optional devices installed on your com-
puter. The program displays the titIe of each check on the screen.
For a complete list of the error codes and messages these tests may dis-
play, refer to Appendix A.
System Board Check
Use this option to check the operation of each major component on the
system board, including:
l
The 80286 CPU chip
l
The system ROM
l
The real-time clock, CMOS RAM, and battery
l
The main integrated circuits.
The checks made on the 80286 CPU chip are extremely comprehensive
and ensure that the CPU instruction set, including protected-mode
operation, is functioning correctly.
If an error occurs, make a copy or a printout of the error code and
message, and contact your dealer or Epson for customer service. Attempting
to correct system board errors yourself may violate your warranty agree-
ment.
Memory Check
Use
this option to check the memory installed in your computer,
including expansion memory. The program checks the internal jumpers to
determine the amount of main memory, and reads the CMOS RAM to find
the amount of expansion memory If any settings are incorrect, use Setup to
define the correct amount in CMOS RAM and adjust the jumpers on the
system memory card.
4-6
Diagnostics