Epson EPL-N2550, Руководство пользователя

Страница: 181 / 339

Using the Control Panel
181
7
7
7
7
7
7
7
7
7
7
7
7
If you select
BarCode
, the printer converts bit images to bar codes
by automatically filling in any vertical gaps between dots. This
produces unbroken vertical lines that can be read by a bar code
reader. This mode will reduce the size of the image being printed,
and may also cause some distortion when printing bit image
graphics.
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.
CharacterSet
Selects character table 1 or 2.
Status and Error Messages
This section contains a list of error messages shown on the LCD
panel, giving a brief description of each message and suggestions
for correcting the problem. Note that not every message shown
on the LCD panel indicates a problem. When the
mark is
displayed at the left of the warning message, multiple warnings
occur. To confirm all warnings that occur, press the
d
Down
button to display the Status Menu, then press the Enter
button. The LCD panel also displays the amounts of remaining
toners.
Cancel All Print Job
The printer is canceling all print jobs in the printer memory,
including jobs the printer is currently receiving or printing. This
message appears when the
+
Cancel Job button has been
pressed down for more than 2 seconds.
Cancel Print Job