manualshive.com logo in svg

Epson EPL-5900, Руководство по обслуживанию

Поделиться
Скачать
Epson EPL-5900 Скачать руководство пользователя страница 69

EPSON EPL-5900/EPL-5900L

Revision B

Product Description

Paper Feed Specifications (Only for EPL-5900L)

52

1.9  Paper Feed Specifications (Only for EPL-5900L)

1.9.1  Paper Size

The following three types of information related to paper sizes are available:

Printer paper size: 

Paper sizes for the MP Tray that the printer recognizes, 
stored in EEPROM

MP Tray paper size: 

A size of paper that is loaded in the MP Tray and is 
actually fed.

User setting size: 

Paper sizes that the user specifies in the printer driver.

<Supported paper sizes>

A4, A5, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, MON, C10, DL, C5, C6, IB5, 
User defined size

The aforementioned printer paper size is changed or determined as follows:

When the printer is powered on: Undefined.
After ejecting paper:  When the User setting size is a standard size: 

If the Check Paper Size error does not occur 

→ 

User setting size.

If the Check Paper Size error occurs 

→

 Undefined.

When the Paper Out error occurs: Undefined. 

However, if paper runs out during continuous printing, 
previous value remains.

When User setting size is the User defined size: 

No modification is added to the paper size.

NOTE:

Refer to 1.9.3 "Case List".

1.9.2  Paper Feed Specifications

Paper Set error occurs only once in one document.

NOTE:

Refer to 1.9.3 "Case List".

Table 1-55. Paper Feed Specifications

Items

Specifications

Methods of detecting the Paper Set 
error

The printer detects the error when the Printer paper 
size differs from the User setting size (red LED 
blinks). 
However, this error does not occur if the User setting 
size is other than standard sizes (User defined size) or 
the Printer paper size is undefined.

Methods of detecting the Check Paper 
Size (warning)

The printer detects the error when the User setting 
size differs from the MP Tray paper size.
However, when the User setting size is other than 
standard sizes (User defined size), this error is not 
detected.

Error processing after printing

After printing, even if the Check Paper Size error 
occurs, printing continues until the job completes.

Содержание EPL-5900






















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды