manualshive.com logo in svg

Epson EPL-5900, Руководство по обслуживанию

Поделиться
Скачать
Epson EPL-5900 Скачать руководство пользователя страница 60

EPSON EPL-5900/EPL-5900L

Revision B

Product Description

Control Panel

43

1.5.2.1  Setting Items (Model-dependent) (Only with EPL-5900)

Described below are model-dependent specification details of the setting items for 
EPL-5900.

MP MODE

 When the paper source setting is “Auto” or not specified, MP mode determines the 
priority of the sources.

Normal: 

MP > LC (MP Tray has priority)

Last: 

LC > MP (Lower Cassette has priority)

TRAY ASSIGN

Tray Assign changes the assignment for the paper source select command (ESC&I#H). 
Effective only for PCL mode.

PAPER TYPE

Specifies the paper type loaded in the MP Tray.

„

Normal: Normal 

paper

„

Thick W: 

Thick paper

„

Thick N: 

Thick and narrow paper like an envelop.

„

Transprnc:  OHP sheets

MP TYPE, LC TYPE

Specifies the paper type for MP Tray or LC.

When “Paper Source = Auto”, MP Type and LC Type are used to select a unit that 
matches the paper type specified by the printer driver.

In a printer mode without such command, the same operation as when “Plain” is 
selected is performed.

“Transpmcy” and “Label” cannot be set to LC1 Type. Other parameters are common to 
MP Type.

The correspondence of “Paper Type” and “MP Type” setting and the printing media is 
as follows:

PARALLEL I/F, USB I/F, AUX I/F

Only interfaces that are set to “On” by the panel setting can be used by the automatic 
selection.
All interfaces are set to “On” at the factory default setting.

To use a fixed interface, set “On” only for the interface that to be used.

Changes to the interface setting will be effective after the Reset All is performed or the 
power is turned on again.

If “Off” is set to all interfaces, they are reset to “On” after the Reset All is performed or 
the power is turned on again. (It is not allowed to set “Off” to all interfaces.)

Table 1-44.  Tray Assign

 The correspondence of 

the parameter #

MP

LC

Notes

4

1

4

HP Laser Jet 4 compatible

4K

4

1

HP Laser Jet 4000/5000/8000 compatible

5S

8

1

HP Laser Jet 5Si compatible

Table 1-45.  Paper Type, MP Type, and the Printing Media

Paper Type (Setup Menu)

MP Type

Printing Media

Normal

OHP

OHP

Normal

Other than OHP

Normal paper

Thick W

Any

Thick paper

Thick N

Any

Postcard/Envelop

Transprnc

Any

OHP

Содержание EPL-5900






















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды